Dome Camera installation and maintenance

• Dome Camera installation and maintenance. Compared to analog monitor, network monitoring not only facilitate the management, wiring is simple, strong anti-interference, low cost, maintenance is simple, easy to expand and so on, so network monitoring will gradually replace the analog monitor which is an inevitable trend.

  

  Dome Camera installation

  1, familiar with the product performanceProject developers and users get the hemisphere camera products, should be familiar with the product’s technical parameters, such as input voltage, power, functions, as far as possible to know what’s what.

  2, checkBefore install Hemisphere users should detect and adjust the camera to make sure the camera is in proper working condition.3 InstallationBefore the construction, according to the environment and safety, aesthetics, etc., select the installation method: applied the wall, or lifting, etc.

  4, mounting angleThe installation angle of dome camera directly affects the scope of the image monitoring, so needs to operate more according to installation requires. If installed in the cell door is less than 6 meters, the best of the camera’s point of view is 30 ° -60 °; if installed at the cash counter, the camera angle should be considered in the ± 15 ° -20 ° and so on.In short, as much as possible to avoid the appearance of the backlight camera case, this can as far as possible meet customer requirements .

  5, deal with video interfaceDome camera video signal output port, power port, the control signal port is more important, the installation should be waterproof, and antioxidation to avoid instability, uncontrolled, and even not show images.

  Dome Camera maintenance

  Cameras are generally required to work 24 hours a day, so do the maintenance of the camera, you can extend the life of the camera and to protect the stability of the camera image effects, should note the following.

  1. The stability of the camera voltage should be noted, otherwise the effect will affect the image, and even cause the camera to be damaged;

  2. Always check whether the wires are damaged, aging, prevent abnormal situations;

  3. To avoid prolonged direct sunlight or bright light, so as to avoid damaging to the camera CCD;

  4. Require frequent cleaning of the dome camera, such as frequent cleaning of the camera shell surface dust, etc., try not to open the shell, if need to open, first power should be cut off;5. Build camera files to facilitate future inspection and testing.

  Refer: What is the difference between civil dome camera and bullet camera

  cctv dvr